WAVESHAPER™ Frequency Instrument -
Micro-Magnetic Therapy


NOTE: Please be SURE that you've read and understand the WAVESHAPER™ Frequency Instrument - User's Guide, before proceeding with the following Steps.
The following Procedure will produce a Homeopathic-Like Solution and is to be used "FOR EXPERIMENTAL USE ONLY".

1. Fill a 1 oz. Amber Bottle with Distilled Water.

2. Connect the OUTPUT Jack on the WAVESHAPER™ Frequency Instrument to the INPUT Jack on the BIO-ENERGY EQUALIZER.

3. Push the Power Button "IN" on the WAVESHAPER™ Frequency Instrument to turn it "ON".

4. Tune to the SPECIFIC Frequency that you want to IMPRINT in the Distilled Water.

5. Press the Sine Wave (two offset half-circles) Button.

6. Turn the Amplitude Knob COMPLETELY Clockwise.

7. Place the Bottle on top and in the center of the BIO-ENERGY EQUALIZER.

8. Allow the Water to be treated with this SPECIFIC Frequency for 10 minutes.

9. Remove the Bottle SLOWLY from the BIO-ENERGY EQUALIZER.

10. Turn the Amplitude Knob COMPLETELY Counter-clockwise.

11. Push the Power Button "IN" again on the WAVESHAPER™ Frequency Instrument to turn it "OFF".

12. Carry the Bottle in a Pocket on the LEFT Side of the Body or in a Bag/Purse, being carried on the LEFT Side of the Body.

NOTE: The SPECIFIC Frequency, that is now IMPRINTED in the Distilled Water, emits a Micro-Magnetic Field, that provides the NEEDED Energy to the Body to HELP to HEAL itself. Do NOT get the Bottle near Magnets or Electromagnetic Fields, since the IMPRINTED Energy Fields could be ERASED.

Revised 1/23/08