NOTE: There is a third Atomizer in Series, which is described in the text below, but which is NOT shown in the Drawing below. The third Atomizer would be on the left side of and connected to the second Atomizer on the left side of the Drawing below and would look like the first Atomizer on the right side of the Drawing below.

The AETHOZOL Inhalation Therapy Setup (see above drawing) consists of 3 - Glass Atomizers, which are sitting in a Holder and connected in series with ozone-resistant Silicone or Tygon Tubing. The Input Port of the first Atomizer is connected with Tubing to the Output Port of the Ozone Generator and it's Output Port is connected with Tubing to the Input Port of the second Atomizer, which has been filled to the MAXIMUM Oil level mark (about halfway) with Organic Extra Virgin Olive Oil. The Output Port of the second Atomizer is connected with Tubing to the Output Port (NOT input port) of the third Atomizer and it's Input Port is connected with Tubing to a Nasal Cannula or to a Breathing Mask.

First, the Ozone flows from the Output Port of the Ozone Generator into and fills the first Atomizer. Next, the Ozone flows from the first Atomizer into the second Atomizer and combines with the Olive Oil contained inside, producing an Ozonide Compound, known as AETHOZOL (C₁₀H₁₀O₃). The AETHOZOL is then atomized and flows from the second Atomizer as a Vapor into the third Atomizer. Lastly, the AETHOZOL Vapor flows from the third Atomizer into the Tubing and then into a Nasal Cannula or a Breathing Mask.

NOTE: The first Atomizer must be EMPTY, so that it can act as a Trap to PREVENT any Olive Oil from being ACCIDENTLY siphoned backwards into the Ozone Generator. The third Atomizer must also be EMPTY, so that it can act as a Trap to PREVENT any Olive Oil that may have been drawn into the AETHOZOL Vapor stream. The second (center) Atomizer must contain Olive Oil, so that it can act as a purifying Oil Reservoir, when the Ozone flows into it.
When doing the AETHOZOL Inhalation Therapy, the Ozone Output should be 20 ug/ml, the Treatment Session should be done 15-20 minutes twice daily and the Treatment Period should last 3-6 weeks.
Bio-Magnetic Therapy can also be done by placing a Ceramic Magnet (4" X 6" - 3500 gauss) on the Chest with the North Pole/Negative Polarity facing towards the Body. The North Pole Bio-Magnetic Energy will HELP the AETHOZOL to be absorbed MORE EFFICIENTLY into the Lung Tissue, and then into the Bloodstream.